Category Archives: Internet

Installation of External Cellular Antenna on the RV

This afternoon, my friend David G and I installed a Low Profile External Cellular Antenna on the RV. This antenna will be used with the Novatel 4620LE Cellular Modem to improve cellular data performance.

The antenna is an LPMM-7-27. It has two 3G/4G cellular antennas in a single package. The antenna was obtained from, a retail supplier of items to enhance the signal on wireless devices.

I chose the rooftop as the mounting location in order to obtain maximum height. The specific location was chosen based on where I could run the antenna leads into the RV and to the modem.

This particular antenna requires no ground-plane and is designed to be mounted through a bracket or a panel. I had neither and elected to mount it directly to the roof. The bottom of the antenna base had a peel-and-stick sort of adhesive on it. I used that and a bead of clear adhesive around the antenna base.

Panorama Antennas – LPMM-7-27

LPMM-7-27 Specs

Here’s the full specs for the antenna.

Here’s what the completed roof-top installation looks like. The antenna is located between the two vent pipes and to the left of the WiFi Ranger Sky WiFi Repeater.

Installation Complete on roof of 2014 Heartland Landmark Savannah RV

Here’s the equipment that, mounted indoors that this new antenna supports. The signal from the LPMM-7-27 Cellular Antenna connects to the external antenna port of the Novatel 4620LE Cellular Modem from Verizon. The Cellular Data signal is fed via USB to the WiFi Ranger Go Router. The WiFi Ranger Go Router supplies Internet service to devices used in and around the RV via WiFi and Ethernet. One of the Ethernet ports on the Router feeds the Smartthings Home Automation Hub. See more about the “Smartthings in an RV” project in this blog post.

Indoor Equipment: WiFi Ranger Go Router, Smarththings Home Automation Hub, Novatel 4620LE Cellular Modem

Right now, the RV is inside the RV garage, so no decent testing can be performed. I’ll be hitting the road soon and will do some performance testing. I’ll supply power levels as measured at the Novatel 4620LE, with and without the antenna connected. I’ll do this a couple of times over the next 30 days in a couple locations around the U.S.

Below are a few more antenna installation pictures.

Roof of RV before Installation
Antenna Coax from RV
Antenna placement determined, roof prepared, hole drilled for coax and coax fished into RV
Antenna Coax connected to Antenna and connected to Coax Extensions
Antenna Base Before Installation

Smartthings “In an RV”

I’ve deployed Smartthings in my RV – a 2014 Heartland Landmark Savannah 5th wheel.

Smartthings is a cloud connected service that allows you to use a local hub to monitor and sensors to monitor, communicate with and control everyday items in your home, office,  RV etc..

In my RV, I’ve deployed a Smartthings hub and several devices (things) that allow me to monitor conditions and then notify and/or control everyday items.  In a future blog post, I’ll discuss in more detail, what I’m able to monitor, how notification works and what I can control.  I’ll also provide details on a related “control” project to be added to my “Smartthings in an RV” system.

Here are some pictures of some of my installed hardware.

Smart Things in an RV
Smart Things in an RV
WiFi Ranger GO Router, Smartthings Hub and Novatel  4620LE Cellular Modem
WiFi Ranger GO Router, Smartthings Hub and Novatel 4620LE Cellular Modem
Smartthings Motion Sensor - painted black
Smartthings Motion Sensor – painted black
Smartthings Motion Sensor - closeup
Smartthings Motion Sensor – closeup
Smartthings Multi-Sensor
Smartthings SmartSense Multi Sensor
Smartthings Multi-Sensor - closeup
Smartthings SmartSense Multi Sensor – closeup
Aeon Labs - Door-Window Switch
Aeon Labs – Door-Window Sensor